[ LiB ]Summary Chapter5. Configuring Point-to-Point Protocol and Controlling Network Access

Review Questions

1:

What are the downstream and upstream frequency allocations?

2:

What type of modulation methods are used for the upstream and downstream?

3:

What servers are required for the cable access solution to work?

4:

What are the minimum configuration requirements for the CMTS?

5:

What MPEG framing format is used in North America?

  1. Annex A

  2. Annex B

  3. Annex C

6:

What configuration is recommended to deal with upstream noise and interference?

7:

What is the correct syntax to activate upstream port 2 of the cable modem card in slot 4?

  1. interface cable 4/2 upstream no shutdown

  2. interface cable 4/0 no cable upstream 2 shutdown

  3. interface cable 2/0 upstream no shutdown

8:

What is the default operating mode of a Cisco cable access router?

9:

What are the required steps to configure the routing mode on the cable access router?

10:

What command can be used at the CMTS to see the flapping cable modems?

11:

What command can be used at the CMTS to find out the registered and unregistered cable modems?

[ LiB ]Summary Chapter5. Configuring Point-to-Point Protocol and Controlling Network Access
555 slims menthol